TopoLT, ProfLT

In new version TopoLT 10 was made a number of improvements such as:

• Adaptation for AutoCAD 2011.
• Adaptation for BricsCAD V10.3.8.
• Adaptation for ProgeCAD 2010.
• Adaptation for ZwCAD 2010.
• Entities that define the points may be copied or inserted into another drawing without wasting links between entities.
• The saving and repositioning of georeferentiated images can be done correctly also for images that are not evenly rotated and scaled. TopoLT respects now file format „world” ESRI. If you have images that have been georeferentiated with TopoLT, images that are not evenly rotated and scaled, we recommend to save them once again with this version of TopoLT.
• It has been introduced the possibility to scale blocks that are allocated for grid's crosses.
• Now the entities that have extruding defined, entities to which have been applied 3D rotations, 3D alignments, are correctly interpreted.
• It has been introduced the possibility of inverting rows or selection from the table from multiple detachments.
• It has been introduced the possibility to choose separation character for CSV files.
• The loading process of program into CAD program (AutoCAD or IntelliCAD) was optimized.

New functions were introduced:

• Iplan - interpolation points on a 3D plane;
• FixHpct – setting the elevations of point to the elevations of the entities that define points (the block allocated for points);
• RecalcArea – recalculating polylines areas and change the text labels with the new area;
• Mbr – allow to break one or more polylines to a point.

Starting with this version, a new program TransLT is offered as bonus. With this software you can calculate transformation’s parameters and coordinates transformations in a practical and quick way.

What's new in TopoLT 10.1

• Adapted to work on Windows 64-bit, AutoCAD 2010 and 2011 versions on 64-bit.
• New command to restore the links of a parcel with its definition texts. In versions made before 9.0 these links are not done.
• Possibility to draw polygons, paths or points in Google Earth with the assistance of the software TransLT.

What's new in TopoLT 10.2

• The files used for configuration are also searched on the path were the program is installed.
• When using command PUR, if errors occur when calculating polylines areas then through redialing the command errors are avoided. Errors are determined by the way command AREA functions in AutoCAD 2011 in the case of polylines that contain curves that intersect each other.
• Changing command GEdraw to work properly with TransLT 1.2.

What's new in TopoLT 10.3

• Adapted to work on BricsCAD V11.2.3.
• Improvements made for working in program’s tables.
• For polar points calculation command, for all tables was introduced a new column with row’s ID.